| Part # | Description | Price |
SA20001 |
SynthArray-24 Apparatus
includes parts SA10049, SA10047, SA10045, SA10048, SA10041, SA10058, 2 teflon-faced silicone sheets (SA20007), 1 allen wrench, assorted screws and nuts and 1 dime (SA20008). |
$1200.00 |
SA20002 |
SynthArray-24 apparatus w/o condenser
includes parts SA10049, SA10047, SA10045, SA10048, SA10041, 2 teflon-faced silicone sheets (SA20007), 1 allen wrench, assorted screws and nuts and 1 dime (SA20008). |
$750.00 |
SA20051 |
SynthArray-24 Complete
includes SynthArray-24 (SA20001) and IKA Heater/Stirrer Setup (SA20050) note: ETS-D5 controller replaces ETS-D4 shown. See also. |
$3185.00 |
SA20003 |
SynthArray-6 apparatus
includes parts SA10055, SA10047, SA10045, SA10056, SA10061, SA10060, 2 teflon-faced silicone sheets (SA20007), 1 allen wrench, assorted screws and nuts and 1 dime (SA20008). |
$1200.00 |
SA20004 |
SynthArray-6 apparatus w/o condenser
includes parts SA10055, SA10047, SA10045, SA10056, SA10061, 2 teflon-faced silicone sheets (SA20007), 1 allen wrench, assorted screws and nuts and 1 dime (SA20008). |
$750.00 |
SA20053 |
SynthArray-6 Complete
includes SynthArray-6 (SA20003) and IKA Heater/Stirrer Setup (SA20050) note: ETS-D5 controller replaces ETS-D4 shown See also. |
$3185.00 |
| Parts | ||
| Part # | Description | Price |
SA10049 |
Teflon 4x6 13mm Tube Holder | $225.00 |
SA10047 |
Aluminum Inert Top Sleeve | $195.00 |
SA10045 |
Aluminum Inert Top, solid | $70.00 |
SA10048 |
Aluminum Inert Top, 24 hole | $100.00 |
SA10041 |
Aluminum Plate Alignment Guide 13mm | $150.00 |
SA10058 |
Heat transfer block (condenser) 13 mm | $500.00 |
SA10053 |
24 well Funnel Device, shown with reactor block | $280.00 |
SA10069 |
6 well Funnel Device, shown with reactor block | $280.00 |
SA10057 |
24 well Solid Addition Plate, 2.5 mL w/slider | $275.00 |
SA10059 |
24 well Solid Addition Plate, 1.25 mL w/slider | $275.00 |
SA10068 |
6 well Solid Addition Plate, 4 mL w/slider | $245.00 |
| SA10012That clear piece in the pictured above. | Solid Addition Plate Slider | $25.00 |
SA10055 |
Teflon 2x3 27.8 mm EPA Vial Holder | $250.00 |
SA10056 |
Aluminum Inert Top 6 hole | $90.00 |
SA10061 |
Aluminum Alignment Guide 27.8 mm | $210.00 |
SA10060 |
Heat transfer block (condenser) 27.8 mm | $500.00 |
SA10075 |
Blow-down device 24-well | $300.00 |
SA10076 |
Blow-down device 6-well | $300.00 |
SA20007 |
Teflon faced Silicone septa sheets, colors may vary
Includes 2 per package |
$30.00 |
SA20008 |
Accessory Kit included with full reactor kits
Includes replacement parts, a dime, and 1 Allen Key |
$30.00 |
SA20050 |
IKA SynthArray Heater/Stirrer Setup
includes RCT Basic Safety (hotplate stirrer), ETS-D5 with H60/H70 probe (fuzzy logic control, short probe and 1 m extension), H16V Support Rod, H36 Holding Rod and H44 Boss Head Clamp. note: ETS-D5 controller replaces ETS-D4 shown. See also. |
$1985.00 |
SA20061 |
IKA ETS-D5 fuzzy logic control with H60/H70 probe
Suitable for use with RCT Basic Includes short probe and 1 meter extension cable (H60/H70 not pictured). See also. |
$835.00 |
SA20060 |
IKA H60 Short sensor for the ETS-D5
purchase H60 and H70 to convert "IKA Kit" with long probe from Fisher" for use with SynthArray products. See also. |
$180.00 |
SA20070 |
IKA H70 Extension cable for ETS-D5
purchase H60 and H70 to convert "IKA Kit" with long probe from Fisher" for use with SynthArray products. See also. |
$143.00 |
WV11000 |
Glass Vials 8 x 80 mm
for use in 96-well glass microtiter plates |
$100.00/cs. of 1000 |
