| Home |
| Company |
| Technology |
| Products |
| Links |
| About Us |
| Contact |
| Part # | Description | Price | Drawing | Photo |
| SA20001 | SynthArray-24 Apparatus
includes parts SA10049, SA10047, SA10045, SA10048, SA10041, SA10058, 2 teflon-faced silicone sheets (SA20007), 1 allen wrench, assorted screws and nuts and 1 dime (SA20008). |
$1200.00 |  |
 |
| SA20002 | SynthArray-24 apparatus w/o condenser
includes parts SA10049, SA10047, SA10045, SA10048, SA10041, 2 teflon-faced silicone sheets (SA20007), 1 allen wrench, assorted screws and nuts and 1 dime (SA20008). |
$750.00 |  |
 |
| SA20051 | SynthArray-24 Complete
includes SynthArray-24 (SA20001) and IKA Heater/Stirrer Setup (SA20050) note: ETS-D5 controller replaces ETS-D4 shown. See also. |
$3000.00 |  |
|
| SA20003 | SynthArray-6 apparatus
includes parts SA10055, SA10047, SA10045, SA10056, SA10061, SA10060, 2 teflon-faced silicone sheets (SA20007), 1 allen wrench, assorted screws and nuts and 1 dime (SA20008). |
$1200.00 |  |
 |
| SA20004 | SynthArray-6 apparatus w/o condenser
includes parts SA10055, SA10047, SA10045, SA10056, SA10061, 2 teflon-faced silicone sheets (SA20007), 1 allen wrench, assorted screws and nuts and 1 dime (SA20008). |
$750.00 |  |
 |
| SA20053 | SynthArray-6 Complete
includes SynthArray-6 (SA20003) and IKA Heater/Stirrer Setup (SA20050) note: ETS-D5 controller replaces ETS-D4 shown See also. |
$3000.00 |  |
|
| Parts | ||||
| Part # | Description | Price | Drawing | Photo |
| SA10049 | Teflon 4x6 13mm Tube Holder | $225.00 |  |
 |
| SA10047 | Aluminum Inert Top Sleeve | $195.00 |  |
 |
| SA10045 | Aluminum Inert Top, solid | $70.00 |  |
 |
| SA10048 | Aluminum Inert Top, 24 hole | $100.00 |  |
 |
| SA10041 | Aluminum Plate Alignment Guide 13mm | $150.00 |  |
 |
| SA10058 | Heat transfer block (condenser) 13 mm | $500.00 |  |
 |
| SA10053 | 24 well Funnel Device, shown with reactor block | $280.00 |  |
 |
| SA10069 | 6 well Funnel Device, shown with reactor block | $280.00 |  |
 |
| SA10057 | 24 well Solid Addition Plate, 2.5 mL w/slider | $275.00 |  |
 |
| SA10059 | 24 well Solid Addition Plate, 1.25 mL w/slider | $275.00 |  |
 |
| SA10068 | 6 well Solid Addition Plate, 4 mL w/slider | $245.00 |  |
 |
| SA10012 | Solid Addition Plate Slider | $25.00 | That clear piece in the pictured above. | |
| SA10055 | Teflon 2x3 27.8 mm EPA Vial Holder | $250.00 |  |
 |
| SA10056 | Aluminum Inert Top 6 hole | $90.00 |  |
 |
| SA10061 | Aluminum Alignment Guide 27.8 mm | $210.00 |  |
 |
| SA10060 | Heat transfer block (condenser) 27.8 mm | $500.00 |  |
 |
| SA10075 | Blow-down device 24-well | $300.00 |  |
|
| SA10076 | Blow-down device 6-well | $300.00 |  |
|
| SA20007 | Teflon faced Silicone septa sheets, colors may vary
Includes 2 per package |
$30.00 |  |
|
| SA20008 | Accessory Kit included with full reactor kits
Includes replacement parts, a dime, and 1 Allen Key |
$30.00 |  |
|
| SA20050 | IKA SynthArray Heater/Stirrer Setup
includes RCT Basic Safety (hotplate stirrer), ETS-D5 with H60/H70 probe (fuzzy logic control, short probe and 1 m extension), H16V Support Rod, H36 Holding Rod and H44 Boss Head Clamp. note: ETS-D5 controller replaces ETS-D4 shown. See also. |
$1800.00 |  |
|
| SA20061 | IKA ETS-D5 fuzzy logic control with H60/H70 probe
Suitable for use with RCT Basic Includes short probe and 1 meter extension cable (H60/H70 not pictured). See also. |
$780.00 |  |
|
| SA20060 | IKA H60 Short sensor for the ETS-D5
purchase H60 and H70 to convert "IKA Kit" with long probe from Fisher" for use with SynthArray products. See also. |
$180.00 |  |
|
| SA20070 | IKA H70 Extension cable for ETS-D5
purchase H60 and H70 to convert "IKA Kit" with long probe from Fisher" for use with SynthArray products. See also. |
$130.00 |  |
|
